HOME                          About Us                         Products                  Support                       

Contact Us

 
   - A   + A
 www.ptasia.info
  Search   



To create consist and repeatable induction seals, it is critical to maintain a 1/8" gap between the sealing head and cap. Enercon offers a head-to-cap gap gauge; contact us for yours, free of charge. It, along with the step-by-step instructions below, will help you achieve the perfect gap for your sealing needs.
 
Flat and Tunnel Sealing Head > 1.5" Wide
1.  Raise the sealing head several inches above the height of the containers to be sealed.
2.  Place several capped and filled containers on the conveyor, with the caps properly torqued, in a line such that they are centered beneath the sealing head.
3.  Place the gape gauge on top of the containers and lower the sealing head until it is just touching the gap gauge.
4.  Lock the sealing head in that position, slide the gap gauge out and remove the containers.
5.  You are now ready to seal.
 
Tunnel Sealing Head < 1.5" Wide
1.  Raise the sealing head several inches above the height of the containers to be sealed.
2.  Place the gap gauge on the conveyor such that it’s lined up with the centerline of the sealing head.
3.  Place several capped and filled containers, with the caps properly torqued, in a line on the gap gauge.
4.  Lower the sealing head until it just touches the tops of the capped containers and lock the sealing head in that position. Remove the gauge and containers.
5.  You are now ready to seal.
 





Cap Inspection Systems
eJector™
Flashing Light
Mobile Cart
Motion-Foil Detection
Quick-Set Adjustable
Remote Control
Variable Sealing Control
All-in-One Head
Flat Sealing Heads
Tunnel Sealing Head
involving Floratine Products
Tropicana’s Clear PET
Bryson Industries, Inc.,
BBQ sauce/salad
AccuDial spins children
Sam’s Club
HOME                          About Us                         Products                  Support                       

Contact Us

 
    ©Copyright 2002-2018 All rights reserved.
the GROUP of PT Asia
998 Moo 3, Samrong Nua, Muang, Samutprakarn 10270 Thailand
Tel : +66 (0)2 759-3605-12 Fax: +66 (0)2 759-3569
Email : support@ptasia.info